Building Solution

Our System

.image.lazy, .image.tns-lazy-img { display: none; }

Basebar

The base bar forms the basis for the wall sections. The parts are connected to each other via steel straps. A threaded rod is screwed in every meter

.image.lazy, .image.tns-lazy-img { display: none; }

Polyblocks

The Polyblocks will be placed on top of each other according to the layout plan

.image.lazy, .image.tns-lazy-img { display: none; }

Windows

A series of further construction blocks, such as window and door lintels as well as window sills complete the program

.image.lazy, .image.tns-lazy-img { display: none; }

Ring Beam

The ring beam strips are placed on top of the last row of blocks.
The threaded rods come from the base bar through the ring beams and are fixed

.image.lazy, .image.tns-lazy-img { display: none; }

Roofing

Any roofing solution can be easily applied to our building system

Benefits

No mortar
and glue is needed
Can be build by
unskilled workers
Easy to transport
due to lightweight
Various expansion
possibilities
No water is
needed
Very short
construction time
Possibility to
plaster and paint
No heavy machines
needed

The Polybuilder

Polybuilder Blueprint Floorplan Interactive Sketch Draw

.image.lazy, .image.tns-lazy-img { display: none; }

1. Design

An existing floor plan is transferred to the Polybuilder or the floor plan is created from scratch. All information for the cost calculation is then automatically generated. If necessary, at this point the fully calculated wall system can be exported as an IFC file for further planning with CAD and BIM software.

2. Production

The Polybuilder calculates precisely which parts are required, such as Polyblocks, screws or connecting elements. Individual special parts – such as ground bars, cover plates and ring beams – are produced. The positions of the threaded rods in the base bars are calculated for production and standard Polyblocks are taken from stock.

.image.lazy, .image.tns-lazy-img { display: none; }

Required materials transported to construction site

.image.lazy, .image.tns-lazy-img { display: none; }

3. Transport

Thanks to the detailed information reflected on the parts list, the logistics can be planned at an early stage. Only the required elements are transported to the construction site, along side with some spare parts and tools if necessary.

4. Setup

The Polybuilder also creates an easy-to-read and color-coded blueprint for on-site construction. This blueprint can also be grasped by laypeople. Every part has its place, adapting of components on the construction site is not necessary, which means that no building rubble is created.

Polybuilder interactive 3D visualisation

.image.lazy, .image.tns-lazy-img { display: none; }

.image.lazy, .image.tns-lazy-img { display: none; }

5. Dismantling

Since we have a digital twin of each building, it is well documented what components are used and installed. Therefore the dismantling and reuse of the components can be planned upfront and is supported by the Polybuilder.